Display Message - Mercedes-Benz CLS 2015 Operator's Manual

Display messages
#
Check Brake Pad Check Brake Pad
Wear Wear
G
mbrace Inoperative mbrace Inoperative
Collision Preven‐ Collision Preven‐
tion Assist Plus tion Assist Plus
Currently Unavail‐ Currently Unavail‐
able See Opera‐ able See Opera‐
tor's Manual tor's Manual
Collision Preven‐ Collision Preven‐
tion Assist Plus tion Assist Plus
Inoperative Inoperative
PRE-SAFE PRE-SAFE
Inoperative See Inoperative See
Operator's Manual Operator's Manual
Possible causes/consequences and M M Solutions
The brake pads/linings have reached their wear limit.
Visit a qualified specialist workshop.
X
One or more main features of the mbrace system are malfunc-
tioning.
Have the mbrace system checked at a qualified specialist work-
X
shop.
COLLISION PREVENTION ASSIST PLUS is temporarily not opera-
tional. Possible causes are:
the radar sensor system is temporarily inoperative, e.g. due to
R
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
the system is outside the operating temperature range.
R
the on-board voltage is too low.
R
When the causes stated above no longer apply, the display mes-
sage disappears.
COLLISION PREVENTION ASSIST PLUS is operational again.
If the display message does not disappear:
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
Secure the vehicle against rolling away (
X
Restart the engine.
X
COLLISION PREVENTION ASSIST PLUS is temporarily inoperative
due to a malfunction. Adaptive Brake Assist may also have failed.
Visit a qualified specialist workshop.
X
Important functions of PRE-SAFE
safety systems, e.g. air bags, remain available.
Visit a qualified specialist workshop immediately.
X
Display messages
page 170).
Y
®
have failed. All other occupant
249
Z