Storing The Parking Position - Mercedes-Benz MY17 c-class Operator's Manual

Mirrors
108
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if the following conditions are met simul-
taneously:
the ignition is switched on
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side

Storing the parking position

You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
Memory button M
:
Adjustment button
;
Button for the front-passenger side exterior
=
mirror
Button for the driver's side exterior mirror
?
Turn the SmartKey to position 2 in the ignition
X
lock ( page 131).
Y
Press button = for the exterior mirror on the
X
front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button ; to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 131).
Y
Press button = for the exterior mirror on the
X
front-passenger side.
Use adjustment button ; to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the curb.
Press memory button M : and one of the
X
arrows on adjustment button ; within three
seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
After successfully storing, reset the driving
X
position of the exterior mirror.
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the ignition
X
lock ( page 131).
Y
Adjust the exterior mirror on the front-
X
passenger side using button =.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have disengaged
R
reverse gear
if you press button ? for the exterior mirror
R
on the driver's side