Cargo Tie Down Rings - Mercedes-Benz CLS 2015 Operator's Manual

Stowage areas
290
Observe the loading guidelines (
The left-hand and right-hand rear seat backr-
ests can be folded down separately to
increase the trunk capacity.
Folding the seat backrest forward
i
Vehicles with memory function: when you
fold one or both parts of the rear seat back-
rest forwards, the respective front seat
moves forward slightly, when necessary, in
order to avoid contact.
Vehicles without memory function: if nec-
X
essary, move the driver's or front-
passenger seat forward.
Open the trunk.
X
Pull right-hand or left-hand rear seat back-
X
rest release handle :.
The corresponding rear seat backrest is
released.
Fold rear seat backrest ; forwards.
X
Move the driver's or front-passenger seat
X
back if necessary.
Folding the seat backrest back
page 286).
Y
! Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
Move the driver's or front-passenger seat
X
forward if necessary.
Fold rear seat backrest : back until it
X
engages.
If the rear seat backrest is not engaged and
locked, this will be shown in the multifunc-
tion display in the instrument cluster. A
warning tone also sounds.
Move the driver's or front-passenger seat
X
back if necessary.
i
You should always engage the rear seat
backrests if you do not need the through-
loading feature. This will prevent unauthor-
ized access to the trunk from the vehicle
interior.
Securing cargo
Cargo tie-down rings
General notes
Observe the following notes on securing
loads:
Observe the loading guidelines
R
( page 286).
Y
Secure the load using the cargo tie-down
R
rings.