Adjusting The 4-Way Lumbar Sup Port - Mercedes-Benz CLS 2015 Operator's Manual

Seats
110
! Make sure that the rear window roller
sunblind has been retracted before the rear
head restraints are removed. You could
otherwise damage the roller sunblind.
The head restraints can only be removed if the
rear seat folds forward.
To remove: press release catch : and pull
X
the head restraint out of the guides.
To re-install: insert the head restraint so
X
that the notches on the bar are on the left
when viewed in the direction of travel.
Push the head restraint down until you hear
X
it engage in position.
Adjusting the multicontour seat
The multicontour seat function is only availa-
ble for vehicles in Canada.
To adjust the thigh cushion
:
To adjust the backrest contour in the lum-
;
bar region
To adjust the backrest contour in the
=
upper back region
To adjust the side bolsters of the seat
?
backrest
You can adjust the contour of the front seat
individually so as to provide optimum support
for your back and sides.
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 149).
Y
Adjusting the active multicontour
seat
The active multicontour seat is only available
for the driver's side.
You can adjust the active multicontour seat
using COMAND or Audio 20. You can find fur-
ther information in the separate COMAND or
Audio 20 operating instructions.
Adjusting the 4-way lumbar support
To raise the backrest contour
:
To soften the backrest contour
;
To lower the backrest contour
=
To harden the backrest contour
?
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.