Storing The Parking Position - Mercedes-Benz B-Class Electric Drive Operator's Manual

Mirrors
96
Automatic anti-glare mirrors
G WARNING
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks. The electrolyte
is harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
Rinse off the electrolyte from your skin
R
immediately with water.
Immediately rinse the electrolyte out of
R
your eyes thoroughly with clean water.
If the electrolyte is swallowed, immediately
R
rinse your mouth out thoroughly. Do not
induce vomiting.
If electrolyte comes into contact with your
R
skin or hair or is swallowed, seek medical
attention immediately.
Immediately change out of clothing which
R
has come into contact with electrolyte.
If an allergic reaction occurs, seek medical
R
attention immediately.
The "Automatic anti-glare mirrors" function is
only available if the vehicle is equipped with
the "Mirrors package".
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
General notes
The "Parking position of the exterior mirror on
the front-passenger side" function is only
available if the vehicle is equipped with the
"Mirrors package".
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this posi-
tion.
Using reverse gear
Button for the driver's side exterior mirror
:
Button for the front-passenger side exte-
;
rior mirror
Adjustment button
=
Memory button M
?
Make sure that the vehicle is stationary.
X
Turn the SmartKey to position 2 in the igni-
X
tion lock ( page 131).
Y
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror. You should see the rear
wheel and the curb in the exterior mirror.
The parking position is stored.