Storing The Parking Position - Mercedes-Benz GLE Operator's Manual

Hide thumbs Also See for GLE:
Table of Contents

Advertisement

Mirrors
104
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
Vehicles without electrically folding exte-
X
rior mirrors: move the exterior mirror into
the correct position manually.
Vehicles with electrically folding exterior
X
mirrors: press and hold mirror-folding but-
ton : until you hear a click and the mirror
engages in position audibly.
The mirror housing is engaged again and you
can adjust the exterior mirrors as usual
(
page 102).
Y
Automatic anti-glare mirrors
G
WARNING
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks. The electrolyte
is harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
Rinse off the electrolyte from your skin
R
immediately with water.
Immediately rinse the electrolyte out of
R
your eyes thoroughly with clean water.
If the electrolyte is swallowed, immediately
R
rinse your mouth out thoroughly. Do not
induce vomiting.
If electrolyte comes into contact with your
R
skin or hair or is swallowed, seek medical
attention immediately.
Immediately change out of clothing which
R
has come into contact with electrolyte.
If an allergic reaction occurs, seek medical
R
attention immediately.
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if the following conditions are met simul-
taneously:
the ignition is switched on and
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
Button for the driver's side exterior mirror
:
Button for the front-passenger side exterior
;
mirror
Adjustment button
=
Memory button M
?
Bring the vehicle to a standstill.
X
Turn the SmartKey to position 2 in the ignition
X
lock (
page 132).
Y
Press button ;.
X

Advertisement

Table of Contents
loading

Table of Contents