Settings - Mercedes-Benz CLS 2015 Operator's Manual

Menus and submenus
238
Instrument cluster
Selecting the unit of measurement for dis-
tance
The Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in
the multifunction display.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Instr. Cluster Instr. Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer Display Unit Speed-/Odometer
tion.
You will see the selected setting:
miles miles.
Press the a button to save the setting.
X
The selected unit of measurement for dis-
tance applies to:
Digital speedometer in the
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Navigation instructions in the
R
Cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Inst. Cluster Inst. Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display Permanent Display
You will see the selected setting
Temperature Temperature
Sett. Sett. menu.
submenu.
km km
Trip Trip menu
Navi Navi
Sett Sett menu.
submenu.
function.
Outside Outside
or Additional Speedome‐ Additional Speedome‐
ter [km/h] ter [km/h]/Additional
[mph] [mph].
Press the a button to save the setting.
X
i The speed is highlighted in km/h or in
mph conversely to your speedometer.
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrument cluster, in the
displays and the controls in the vehicle inte-
rior can be adjusted with the
Display/Switches: Display/Switches:
func-
Press the = or ; button on the steer-
X
ing wheel to select the
or
Press the : or 9 button to select the
X
Lights Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Brightness Display/Switches: Brightness Display/Switches:
tion.
You will see the selected setting.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
menu
Level 5 Level 5
Press the a or % button to save the
X
setting.
If the light switch is set to Ã, T or
L, the brightness is dependent upon
the brightness of the ambient light.
i
The light sensor in the instrument cluster
automatically controls the brightness of
the multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching the daytime running lamps on/
off
i
This function is not available in Canada.
Additional Speedometer Speedometer
Brightness Brightness
function.
Sett. Sett. menu.
Level 1 Level 1
(bright).
func-
to