Detaching The Rower Belt; Retching The Rower Belt - First Degree Fitness Neptune Challenge AR Owner's Manual

Detaching the Rower Belt

Bungee Shock Cord
Bungee Attachment Point
Reattaching the Rower Belt
Idle Wheel
Rower Handle
Belt/Bungee Pulley
1.To detach belt, simply pull beyond the
Tip: You'll hear the Velcro separating
just before the belt detaches.
2.Cut plastic tie holding bungee at the
1.Begin reattaching the Rower Belt by
Velcro facing
threading around the Rower Belt Pulley
upward
with the Velcro side facing upward as
illustrated.
2.Next, thread the Belt around the Idle
Wheel as shown. Once around the Idle
Wheel, attach the Rower Belt to the
Belt/Bungee Pulley. There is an obvi-
ous "lip" at the attachment point.
3.Wind the Rower Belt onto the Belt/
Bungee Pulley until the Rower Handle
is as it's furthest forward position.
15
range of the normal rowing stroke until
the belt detaches from the Belt Bungee
Pulley.
Bungee Attachment Point, pull the
Cord through all three pulleys and
leave excess on top of the tank for
now.