Detaching The Rower Belt; Reattaching The Rower Belt - First Degree Fitness Viking 2 AR Owner's Manual

Detaching the Rower Belt

1. To detach belt, simply pull beyond the range of the normal rowing stroke until the
belt detaches from the belt bungee pulley.
Tip: You'll hear the Velcro separating just before the belt detaches.
Inner Clip
Bungee Hook End Frame

Reattaching the Rower Belt

Idle Wheel
2.Unhook the Bungee Shock Cord from the Rear Leg.
Then, push out the Inner Clip from the Bungee Hook End
Frame. Pull the Bungee through the Inner Clip until free.
This will allow for the Bungee Shock Cord to be threaded
completely out of the Main Frame and up to the Belt
Bungee Pulley where it will be re-attached once the Row-
er Belt is in the proper position.
1.Begin reattaching the Rower Belt by
Velcro facing
upward
2.Next, thread the Belt around the Idle
20
1.
2.
threading around the Rower Belt Pulley
with the Velcro side facing upward as
illustrated.
Wheel as shown. Once around the Idle
Wheel, attach the Rower Belt to the
Belt/Bungee Pulley. There is an obvi-
ous "lip" at the attachment point.