Detaching The Rower Belt; Reattaching The Rower Belt - First Degree Fitness Titan Rower Owner's Manual

Detaching the rower belt:

1. To detach belt, simply pull beyond the range of the nor-
mal rowing stroke until the belt detaches from the belt
bungee pulley.
Tip: You'll hear the Velcro separating just before the
belt detaches.
2. Cut plastic tie holding bungee at the bungee
attachment point, pull the cord through all three
pulleys and leave excess on top of the tank for now.
Bungee shock
cord
Bungee attachment
point

Reattaching the rower belt:

1. Begin reattaching the rower belt by threading
around the rower belt pulley with the Velcro side
facing upward as illustrated.
Idle Wheel
2. Next, thread the belt around the idle wheel as
shown. Once around the idle wheel, attach the
rower belt to the belt/bungee pulley. There is
an obvious "lip" at the attachment point.