Speaker Assembly - HP EliteBook 745 G2 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes cable)
Before removing the speaker assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service door (see
b. Battery (see
c. Hard drive (see
d. WLAN module (see
e. Fan (see
f. Keyboard (see
g. Base enclosure (see
h. System board (see
Remove the speaker assembly:
1. Position the top cover upside down.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the speaker assembly to the base enclosure.
ENWW
Battery on page
Service door on page
Battery on page 31)
Solid-state drive on page
WLAN module on page
Fan on page 49)
Keyboard on page
Internal base enclosure on page
System board on page
31), and then remove the following components:
29)
32)
36)
38)
46)
57)
Spare part number
730798-001
Component replacement procedures 61