Photometric Chart; Troubleshooting - ADJ VORTEX 1200 User Instructions

Vortex 1200
3000 2200
9500 7200
1200 950
13000 9600
5
20000 11000 7300
0.087 0.175 0.262 0.349 0.437
Vortex 1200
Dimmer
0
0
0S (Fade Time)
Ramp Effect
Standard
0
Stage 780
TV 1180
Architectural 1380
1580
Theatre
ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 31

Photometric Chart

1500 1000 800
6000 4500 3300
340 150 92
8400 5760 3500
5200 3800
Dimmer Curve Chart
T
down
1S (Fade Time)
T T
down（ ms ） down（
0 0
1540
1100
1860
1520
1730 2040
2230
1940
Vortex 1200
Disconnect the unit from its power source. Locate the fuse holder on
the rear panel of the unit. Using a phillips-head screw driver unscrew
the fuse holder. Remove the bad fuse and replace with a new one.
Screw the fuse holder back into the unit containing the new fuse.
Vortex 1200
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses and mirror should be carried out periodically to
optimize light output. Cleaning frequency depends on the environ-
ment in which the fixture operates (I.e. smoke, fog residue, dust,
dew). In heavy club use we recommend cleaning on a monthly basis.
Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Vortex 1200
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
ms ）
0
and outputs are connected.
1660
Unit does not respond to sound:
1940
2120
1. Quiet or high pitched sounds will not activate the unit.
2280
2. Check the sound sensitivity level.
ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 32
Fuse Replacement
Cleaning

Troubleshooting