Administrator Settings - D-Link DIR 635 B3 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while the user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to
change both admin and user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name.The
administrator can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as
the User, you can only see the settings, but cannot change
them.
Gateway Name:
Enter a name for the DIR-635 router.
Enable Remote
Remote management allows the DIR-635 to be configured
Management:
from the Internet by a web browser. A username and password
is still required to access the Web-Management interface.
In general, only a member of your network can browse the
built-in web pages to perform Administrator tasks.This feature
enables you to perform Administrator tasks from the remote
(Internet) host.
Remote Admin
The port number used to access the DIR-635.
Port:
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet
IP address of the DIR-635 and 8080 is the port used for the
Web Management interface.
Inbound Filter:
This section will list any rules that are created. You may click
the Edit icon to change the settings or enable/disable the
rule, or click the Delete icon to remove the rule.
Enable HTTPS
Check to enable HTTPS to connect to the router securely.
Server:
D-Link DIR-635 User Manual

Administrator Settings

54