Administrator Settings - D-Link EBR-2310 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as the User,
you can only see the settings, but cannot change them.
Gateway Name:
Enter a name for the EBR-2310 router.
Remote
Remote management allows the EBR-2310 to be configured from
Management:
the Internet by a web browser. A username and password is still
required to access the Web-Management interface. In general, only
a member of your network can browse the built-in web pages to
perform Administrator tasks. This feature enables you to perform
Administrator tasks from the remote (Internet) host.
Remote Admin
The port number used to access the EBR-2310.
Port:
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP
address of the EBR-2310 and 8080 is the port used for the Web
Management interface.
D-Link EBR-2310 User Manual

Administrator Settings

40