Makita 4304 Instruction Manual page 14

To attach the vacuum head on the tool,
insert the hook of the vacuum head into
the hole in the base. Tighten the bolt to
secure the vacuum head. Then connect
a
Makita vacuum cleaner to the vacuum
head.
Hex wrench
Plastic cover=\
I
-Hose of vacuum cleaner
MAINTENANCE
CAUTION :
Always be sure that the tool
i s
switched off and unplugged before attempting to perform
inspection or maintenance.
To maintain product SAFETY and RELlABl LITY, repairs, carbon brush inspection and
replacement, any other maintenance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita replacement parts.
14