ENGLISH (Original instructions) SPECIFICATIONS Model 4300BA 4300BV Length of stroke 26 mm 26 mm In wood at 90° 55 mm 55 mm Max. cutting capacities In wood at 45° 35 mm 35 mm In steel at 90° 6 mm 6 mm...
Do not abuse the cord. Never use the cord for rate for which it was designed. carrying, pulling or unplugging the power tool. 19. Do not use the power tool if the switch does Keep cord away from heat, oil, sharp edges or not turn it on and off.
Keep hands away from moving parts. to the "OFF" position when released. 10. Do not leave the tool running. Operate the tool For Model 4300BA only when hand-held. Always switch off and wait for the blade to 1. Lock button come to a complete stop before removing the 2.
Installing the universal shank jig saw blade ASSEMBLY 6.35mm CAUTION: Always be sure that the tool is switched off and • unplugged before carrying out any work on the tool. Installing or removing saw blade 1. Blade holder 2. Blade set 3.
Loosen the bolt on the back of the base with the hex Circular guide (optional accessory) wrench. Move the retainer so that the roller contacts the blade lightly. Then tighten the bolt to secure the base and 1. Circular guide the retainer.
Bevel cutting Cutouts Cutouts can be made with either of two methods A or B. A) Boring a starting hole 1. Starting hole 005931 CAUTION: 005934 Always be sure that the tool is switched off and • For internal cutouts without a lead-in cut from an unplugged before tilting the base.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding 005938 these accessories, ask your local Makita Service Center. MAINTENANCE Jig saw blades • Hex wrench 3 • Rip fence (Guide rule) CAUTION: •...
Makita Corporation Anjo, Aichi, Japan www.makita.com 883023B227...