Download  Print this page

Makita 4304 Instruction Manual page 7

Variable speed
Hide thumbs

Advertisement

Installing the universal shank jig saw blade
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the blade.
If the universal blade clamp is used, you
can use blades of other makes which have
a universal shank like the one shown in
the figure, with
a
blade width
of 6.35 mm
(1 /4"
1.
c
Insert the blade into the blade holder as far
as it will go. Make sure that the end of the
blade shank reaches the bottom of the
inner
s l i t
and tighten the bolt securely with
the hex wrench.
Selecting the cutting action
This tool can be operated with an orbital
or a straight line cutting action. To change
the cutting action, just turn the lever to the
desired cutting action position. Refer to
the table below to help determine the
appropriate cutting action.
The end of the blade
-
shank should reach the
bottom of the inner slit
Bolt
7

Advertisement

loading

  Also See for Makita 4304

This manual is also suitable for:

4305