Makita 4304 Instruction Manual page 8

Position
Cutting action Applications
I ~~~ ~~~~ ~ ~ ~ ~ ~~~ I
I
I
Smallorbit cutting action
1
For
cutting mild steel, aluminum and hard wood.
straight
line cutting action
0
For
cutting mild steel, stainless steel and plastics.
For
clean cuts in wood and plywood.
To start the tool, simply pull the trigger.
Release the trigger to stop. For continuous
operation, pull the trigger and move the
lock lever backward. To stop the tool from
the locked position, pull the trigger fully,
then release it.
I11
Speed adjusting dial
I
Locklever
Large orbit cutting action For fast cutting in wood and plywood.
w
c S w i t c h trigger
For 4305
CAUTION :
Before plugging in the tool, always check to see that the switch actuates properly.
To start the tool, slide the switch lever for-
ward. Slide the switch lever backward to
stop.
,-Switch lever
8