Cable Connections - Ganz ZN-BT662XE-MIR Installation Manual

ZN-BT662XE-MIR Installation Guide

5. CABLE CONNECTIONS

Cable arrange
DI/DO Connection
A: DO-, B: DO+ , C: DI+ , D: DI-
Sensor (DI) connection
The camera provides 1 channel D/I. It can be connected to either a voltage type sensor or a
relay type sensor as the following figures. It can be selected by software.
Input voltage range: 0VDC minimum to 5VDC maximum, Max 50mA
Input voltage threshold: 1.5V
!
Do not exceed the maximum input voltage or relay rate.
Caution
01A.01
A : DO-
B : DO+
C : DI+
D : DI-
DI/DO
Power DC 12V
LAN Port
Red : AIN Audio In
White : AOUT
Audio Out
11