Ganz ZN-BT662XE-MIR Installation Manual page 12

ZN-BT662XE-MIR Installation Guide
Internal
Alarm (DO) connection
Only the relay type is supported.
Relay Rating: Max 24VDC 50mA
!
Do not exceed the maximum relay rating.
Caution
Power Connection
A 12 DC power connector is required for this device.
Network Connection
This is a RJ45 LAN connector for 10/100 Base-T Ethernet. Connect a LAN cable.
Audio Input/Output Connection
Connect the audio input device such as a mike to the audio input port and the audio output
device such as the amplifier speaker to the audio output port.
Audio Input : Linein, 1.43Vp-p(M in 1.35Vp-p, max 1.49 Vp-p), 39 KΩ
Audio Output : Lineout, 46mW Power, 16 Ω
01A.01
+3.3V
Output of
Sensor
DI
+
COM
Relay Type
Internal
Relay Type
Internal
-
Voltage Type
Device
DO
COM
Output of
Sensor
DI
+ -
COM
- +
12