Adjusting Led Options And Lens Focus; Setting The Image Attribute - Ganz ZN-BT662XE-MIR Installation Manual

ZN-BT662XE-MIR Installation Guide

4.2. Adjusting LED options and lens focus

Adjust the zoom and focus of the lens with the lever of ① and ② on the following picture.
TELE
WIDE
TELE/WIDE: Uses for zoom
FAR/NEAR: Uses for focus
AF: Auto focus
NT/PAL: NTSC, PAL button
Vout: Uses only for installation

4.3. Setting the Image Attribute

You can set the image attribute of camera through the webpage.
The menu of image attribute can be seen under Setup > Video & Audio > Camera. Brightness,
contrast, saturation and sharpness can be adjusted.
01A.01
FAR AF
NEAR NT/PAL
RESET
VOUT
IPN6602HD-531
TELE FAR AF
WIDE NEAR NT/PAL
F/D
VOUT
10