Assembly Instructions - Everlast EV1000 Assembly & User Instructions

Assembly Instructions

50
3
Step 1
a: Put the Outer Side Cap (50) onto
the Front Base Frame (1) and Rear
Base Frame (3) carefully.
Attach the Seat Support (2) to the
Front Base Frame (1) using 2pcs x
Hex Bolt (69), 4pcs x Washer (79)
and 2pcs x Nylon Nut (83).
Remove 2 sets of Hex Bolt (62) and
Arc Washer (75) from one side of
Weight Guide Rod (21).
21
49
b:
75
62
1
50
b: Attach 2pcs x Weight Guide Rod
(21) into the Rear Base Frame (3)
using 2 sets x Hex Bolt (62) and
Arc Washer (75).
Slide each the Rubber Ring (49)
onto each Weight Guide Rod (21).
UNPACK THE CARTON AND
PLACE ALL PARTS ON THE
FLOOR CAREFULLY
REMOVE ALL PACKING
MATERIAL AND CHECK EACH
PART AS THE MANUAL FIRST,
REMEMBER SOME PARTS
ARE PRE-FITTED TO LARGER
COMPONENTS.
IMPORTANT
ASSEMBLE WITH ALL NUTS
AND BOLTS LOOSE AT
FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY
STEPS.
a:
2
79
69
83
79
6