Everlast EV1000 Assembly & User Instructions page 13

Assembly Instructions
56
5
Step 8
2pcs x Big Oil Bushing (73) have
been assemblied on the Top Beam
(8). 4pcs x Oil Bushing (74) have
been assemblied on the Left and
Right Butterfly Arm (10 and 11).
Cut the belts from the Top Beam
(8) first.
a: Attach the Press Bar (9) to the
Top Beam (8) using the Axle (72), 2
13
73
8
9
sets x Washer (77) and Nylon Nut
(84).
Insert the Pin (56) into the hole of
the Press Bar (9).
Cut the belts from the Left and
Right Butterfly Arm (10 and 11)
first.
b: Attach the Left and Right
Butterfly Arm (10 and 11) to the
a:
56
77
72
84
5
11
84
77
9
71
74
77
74
77
b:
84
12
75
62
Press Bar (9) using one Hex Bolt
(71), 2pcs x Washer (77) and one
Nylon Nut (84) on each side.
Slide the Big Foam (34) to the Left
and Right Butterfly Arm (10 and 11)
Attach the Handle Bar (12) to the
Left and Right Butterfly Arm (10
and 11) using 6 sets Hex Bolt (62)
and Washer (75).
10
62
75
34