Control Panel And Features - Kenmore 67102 Use & Care Manual

Not all features and options are available on all models.
Appearance may vary.
O CYCLE STATUS LIGHTS
Lights indicate the progress of the drying cycles.
O
O
DRYER CYCLE KNOB
Use your Dryer Cycle Knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
Auto Dry with Auto Moisture Senslng
TM
Control
Automatic cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size, and
dryness setting.
Timed Dry
Will run the dryer for the specified time on the control.
OPTIONS AND SETTINGS
Dry Temp
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the higher
setting.
NOTE: The Air Only Temp feature is not available on the
Auto Dry Cycles.
O
Wrinkle Guard
TM
Feature
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
GUARD
TM
feature periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming.
[] Get 90 minutes of heat-free, periodic tumbling at the end
of a cycle. Press the WRINKLE Guard
TM
button to turn
ON or OFF at any time before the cycle has ended.
Cycle Signal
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired setting (On or Off)
is selected.
NOTE: When the Wrinkle Guard
TM
setting is selected
and the Cycle Signal is on, the tone will sound every
20 minutes until the clothes are removed, or the Wrinkle
Guard
TM
setting ends.
START/PAUSE BUTTON
Press START/PAUSE to start a cycle, or press START/PAUSE
once while a cycle is in process to pause the cycle.
POWER BUTTON
Press POWER to turn the dryer on and off.