Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
Use your cycle knob to select available cycles on your dryer.
Turn the knob to select a cycle for your laundry load. See
"Cycle Guide" for detailed descriptions of cycles.
Will run the dryer for the specified time on the control.
On models with a selectable temperature button, you
may choose a setting based on the fabrics in your load.
Drying time and temperature will vary depending on your
Sensing cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size,
and dryness setting.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining (for Sensing Cycles) or actual
time remaining (for Timed Cycles) will be displayed.
Touch the setting names next to the display to adjust settings.
See "Cycle Guide" for available settings on each cycle. Not
all settings are available with all cycles.
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the higher
setting. See "Cycle Guide."
CONTROL PANEL AND FEATURES
Not all features and options are available on all models.
Appearance may vary.
You may adjust the Dry Level on Sensing Cycles (except
for the Sanitize cycle), if desired.
NOTE: Dry Level is for use with Sensing Cycles only.
The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the
end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Guard™ option is selected and
the Cycle Signal is on, the tone will sound at 15 minutes,
30 minutes, and at the end of Wrinkle Guard™.
Time Adjust for Timed Cycles Only
Use "+" and "–" with Timed Cycles to increase or decrease
the length of a Timed Dry or Express cycle.
Use to select available options for your dryer. Not all cycles
and options are available on all models.
Energy Saver option
Activate the ENERGY SAVER setting to increase your
energy savings. This setting uses a lower heat level and
extends cycle time. Turn on for optimal energy savings.
Turn off for optimal cycle times. ENERGY SAVER will
default on for NORMAL.
NOTE: Energy savings is not available on all cycles, and
may vary across loads and cycles.