Table of Contents
Advertisement
Using the test
Depending on the way you enter the
Command
a single test or multiple tests on a component.
Single Test
Use the following syntax to run a single test:
Syntax
>>> test device_name
where device_name is one of the device names listed in
Table 14–2.
Multiple Test
Use the following syntax to run multiple tests:
Syntax
>>> test device_name1:device_name2
where device_name1 is the device you want to start with, and
device_name2 is the last device you want to test. The diagnostic
tests are run in the same order as the list of device name tests
in Table 14–2.
Example
One diagnostic test is the SCC test, which tests the
Diagnostic Test
communication devices attached to your system unit, such
as the keyboard and mouse. Figure 14–1 shows an example of
an SCC test display.
Figure 14–1 SCC Diagnostic Test Display
>>> test scc
T-STS-SCC-OK
>>>
test
Return
Return
Running Diagnostic Tests 14–5
Running Diagnostic Tests
command, you can run
Return
Advertisement
Table of Contents
