Advertisement
Available languages
Available languages
Installation
Instructions
PREPARING THE OPENING
MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE DIMENSIONS
23" MAX. De
R - IVllN. clearance
of unprotected
from cutout to right
overhead
side wall
cabinets
I
]0" MIN. clearance from
countertop
to unprotected
overhead surface
C- MIN.
I
clearance from
I
cutout to rear
wall
L - MIN. clearance
from cooktop to left
side wall
]0" or wider
cabinet base
18" MIN. height
countertop
to nearest
cabinet
on either
side of unit
2-1/2"
MIN from cutout
to
front of countertop
ALL HORIZONTAL
CLEARANCES MUST
BE MAINTAINED FOR
PGP976
A MINIMUM OF 18"
PGP986
ABOVETHECOOKING CGP650
SURFACE,
NOTE: Allow 7/16" minimum
_
,-2"
vertical clearance
from
s 11/16 €
the cooktop
bottom (or
3_
L
3-3/a,"
12"
12"
R
C
6"
3-3/8"
12"
3-3/8"
12"
3-3/8"
7/16"
DRAWERI_
3-11/16"
minimum
depth
from the countertop)
to any
combustible
surfaces, such as
a cabinet drawer.
For island installation,
maintain
2-1/2 in. minimum
from cutout to
front and back edge of countertop.
Maintain 3 in.
minimum
from cutout to side edges of countertop.
E_ OVERALL COOKTOP DIMENSIONS
3-1/4"
18-7/8"
_
F_ CUTOUT DIMENSIONS OF COUNTERTOP
To ensure accuracy, it is best to make a template
when cutting the opening in the counter,
19-1/8" width cut
RECOMMENDED
GAS SUPPLY
LOCATION FROM BACKWALL
Recommended
gas supply
location
1" Min. From Backwall
From Cutout
Center Line
r_
MAKE SUREWALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN WITHSTAND
HEAT (UPTO 200°FI GENERATED BY
COOKTOP
countertop
must l
withstand heat
I
[]_] FOR AMERICANS WITH DISABILITIES
ACT (ADA} FORWARD APPROACH
INSTALLATION ON LY:
Allow 5" minimum
I
depth between the
I
countertop
and an
I I
enclosure.
_
I
I
I
U
NOTE: The enclosure must be made of wood
material. Also, an access panel is required for the
electrical outlet, pressure regulator, shut-off valve,
hold-down
brackets, and service.
Advertisement
