Preparing The Opening; Overall Cooktop Dimensions - GE PGP953 Installation Instructions Manual

Installation Instructions
PREPARING THE OPENING
[1] MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE DIMENSIONS
13" MAX. Depth of unprotected
overhead cabinets. R- MIN. clearance
from cutout to right
|_db side wall
(
: |
30" MIN. clearance from
countertop to unprotected
to nearest
cabinet on either
side of unit
C-MIN.
clearance from
cutout to rear
wall
L- MIN. clearance
from cooktop to left -
side wall
30" or wider
cabinet base
2-1/2" MIN from
cutout to front of
countertop
NOTE: All gas cooktop models require 7/16" free
area below cooktop bottom to combustible material.
L R Cc
PGP953 | 3-3/4" 6" 2-1/4"
PGP959 12" 12" 2-7/8"
CGP350 12" 12" 2-7/8"
ALL HORIZONTAL CLEARANCES MUST BE MAINTAINED
FOR A MINIMUM OF 18" ABOVE THE COOKING SURFACE.
[3] CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
[4 | RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
1" Min. From Backwall
Recommended vA
gas supply <7'>
location
From Cutout
4 — Center Line
[2] OVERALL COOKTOP DIMENSIONS
30"
—_— Tt
SS TT "
, 28-1/4"
19-3/8" [i
[5] MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT (UP TO 200°F)
GENERATED BY COOKTOP
Wall covering,
cabinets and
countertop must]
withstand heat |
up to 200°F