Table of Contents
Advertisement
Available languages
Available languages
This product will accept
Craftsman
19.2V C3 lithium-ion
battery
packs. For
complete
charging
instructions,
refer to the Operator's
Manual for the battery
pack and charger.
_,
WARNING:
To prevent accidental
starting
that could cause serious personal
injury, always remove the battery pack from the tool when assembling
parts,
making adjustments,
installing or removing
blade, cleaning,
or when it is not
in use.
TO ATTACH BATTERY
PACK (Fig, 2)
Fig. 2
1.
Ensure that the trigger switch is
in the "OFF" position.
2.
Align the raised rib on the battery
pack with the groove inside the
circular saw, and then insert the
battery pack into the tool.
Rib
NOTICE:
Make sure that the
latch on the battery
pack snaps
Button
into place and the battery pack
is secured to the tool before
beginning
operation.
Improper
assembly
of the battery pack can cause damage to internal components.
TO DETACH BATTERY
PACK (Fig. 3)
1.
Ensure that the trigger switch
is
in the "OFF" position.
2.
Depress both battery-release
buttons,
located
on the sides of
the battery
pack, to release the
battery pack.
3.
Pull the battery
pack out and
remove it from the tool.
Fig. 3
SAW BLADES
The best of saw blades will not cut efficiently
if they are not kept clean, sharp
and properly
set.
Using a dull blade will place a heavy load on the saw and increase the danger of
kickback.
Keep extra blades on hand, so that sharp blades are always available.
14
Advertisement
Table of Contents
