8. Don't force tool. It will do the job better and be safer at the rate for which it was designed° Craftsman power tools (or welders) are unconditionalJy guaran- teed one year to be repaired...
It functions also as a hold-down Increasing Blade Life--When blade teeth become spot simpty loosen the lower wing nut located saw table, and raise the table to a section of new, unused teeth.. Tilting Table--For angle sawing, the table either direction...
Avoid excessive tightening of the chuck cap CHUCK LEVER TO TIGHTEN CHUCK WRENCH TO LOOSEN Accessories-- It's a scroll saw--Handles extension work to full size furniture housing is the 4's, 18 ga. copper, 1/4" aluminum shaft.. mounted power take-off OFF.
PARTS LIST FOR CRAFTSMAN MOTORIZED ORDER BY PART NUMBER Part Code Number Description 4046 Guard "2 4035 Hex Nuts No. 10-32 15071 Left Side Frame 4033 Trim Screws No, 4 x _iB Type A 15021 Frame Cover 15068 Nylon Guide...
U.S.A. Made UoSA, to ORDER The Model Number wilt be found on a plate attached to your Saw at the rear of the base, Always mention the Model Number when requesting service or repair parts, All parts listed herein may be ordered through SEARS, ROEBUCK...