Televes 7287 User Manual page 45

User manual
Manual Search:
Select this mode if you wish to search for a given channel.
For the purpose, once you have chosen the option "Manual Search",
press the OK button to accept. You will then access a sub-menu where
you must use the buttons V+/V- to indicate the channel in which you wish
to search.
Note whether the channel selected is digital. You will know this if the
bottom "Signal Quality" bar shows an acceptable quality percentage.
If you wish to change the PID PCR, PID video or PID audio parameters,
press button F2 (green) to enable this option. Type in the new values
using the numerical keyboard. Bear in mind that if these values are
incorrect, the search will fail.
Finally, press button F1 (red) to start the search.
You may continue the search process following the steps indicated on the
TV screen. When the search ends, the names of the programs found will be
shown.
Press the MENU button to exit the menu and return to the normal mode.
Search by Frequency:
Select this mode to carry out a selective search on a given frequency.
For the purpose, once you have selected the option "Search by
Frequency", press the OK button to accept. You will then access a sub-
menu where the exact frequency selected should be typed in, using the
numerical keyboard.
Select the band width that will be used to carry out the search on that
frequency by using the V+/V- buttons.
Finally, press the F1 (red) button to start the search.
LCN Settings:
This option allows the user to enable or disable the organization mode of
the channels defined by the operator.
Note: This option is automatically enabled when you select the French
language.
45
"DTR-7287"