Edge Warping Workflow - Barco XHD series User Manual

Appendix I: Workflow layouts
resulting image. Moving points that are part of multiple shapes has an effect on all of
those shapes. If the user only creates a shape and moves it, the adjacent elements are
not modified, resulting in discontinuity in final image. If a shape is part of a mosaic-like
structure, however, where its points and edges are used in adjacent elements, moving
it adjusts the adjacent elements, keeping the resulting image continuous.
Shapes defined with this tool can also be used as all-black masks in the image.
This tool can be zoomed in or out and panned with the mouse wheel.
Figure I.26. Edge Warping workflow

Edge Warping workflow

1. Select Point Creation Mode (in the Global section or the Calibration
pane) and place points on the image in the Viewport pane.
Points should be placed at edge intersections, image corners, or at the
edge of content that is to be displaced.
2. Select three or four points by clicking on them.
Barco Pn: 60600320
Barco Media Server XHD-Series User Guide
177