Table of Contents
Advertisement
Barco Media Server XHD-Series User Guide
3.
Click on Create New Shape (the Plus sign) to create a new triangle or
quad from the selected points.
4.
Repeat Steps 1 to 3 as needed to create the points and shapes that you
need.
To delete a point or a shape, select it and press the Del key.
5.
Move the points and shapes until the projected image fits accurately
on the surface.
Edge Warping controls
The Global section of the Calibration pane provides controls for displaying points and
shapes in the Viewport pane.
Show Wireframe:
Show Points:
Reset:
The Shapes section of the Calibration pane provides controls to create, delete, or modify
shapes.
Create New Shape (+):
Delete Shape (×):
178
a.
Multiple points can be selected using the Shift key.
b.
Selected points are shown in red, unselected points
are shown in blue. By default, newly created points
are selected.
Tips
•
If the image contains no empty regions, define a mosaic of
your whole image starting from the four corners, in order to
preserve continuity.
• Keyboard shortcuts can help defining points and shapes
faster.
• Ctrl+click can be used to create points.
• The F key and the Del key can be used to
create and delete shapes.
• Shift+click can be used for multiple selection
and deselection.
Toggles between showing or not showing the shape wireframes.
Toggles between showing or not showing the points.
Removes all points and shapes.
Creates a new shape from selected points.
You can also use the F key to create a new shape
from the selected points.
Deletes the currently selected shapes.
Appendix I: Workflow layouts
Barco Pn: 60600320
Advertisement
Table of Contents
