Calibration Layout Manual Blending - Barco XHD series User Manual

Barco Media Server XHD-Series User Guide
Figure I.27. Calibration layout Manual Blending
Different blending properties can be defined for each of the projector's edges (left, right,
top, and bottom).
Brightness:
Contrast:
Force color:
Gamma:
Reset:
Enabled:
Width:
Sharpness:
180
Adjusts the brightness of the projected image
Adjusts the contrast of the projected image
Projects the specified color instead of the projected image, for calib-
ration purposes
Adjusts the gamma of the projected image
Gamma can be set individually for each color component (R, G, and
B). By default, all three components keep the same value when
changed. To disable this behavior, click on the link icon (similar to
scaling in 3D object properties).
Resets all the blending properties to their initial values
Edge-specific properties can also be set for a specific edge.
Enables the blending for an edge
Defines the width of the blending for the edge
Defines the sharpness of the blending for an edge
A higher sharpness results in a well-defined border for an edge's
blending, while a lower sharpness results in a smoother effect.
Appendix I: Workflow layouts
Barco Pn: 60600320