Yealink W52P Quick Reference Manual

Press during a call to mute the call.
Press again to un-mute the call.
Press the soft key during a call, and select
If there is only a call on hold, press the
If there are two calls on hold, press the
press the soft key to swap between the two calls.
You can transfer a call in the following ways:
1. Press the soft key during a call, and select
2. Enter the number you want to transfer the call to.
3. Press the soft key.
1. Press the soft key during a call, and select
2. Enter the number you want to transfer the call to.
3. Press the soft key to dial out.
4. Press the soft key when you hear the ring-back tone.
1. Press the soft key during a call, and select
2. Enter the number you want to transfer the call to.
3. Press the soft key to dial out.
4. Press the soft key after the call is answered.
1. Press the key to enter the main menu, and select
2. Press or to highlight the desired line, and press the
3. Press or to highlight the desired forwarding type, and press the
Incoming calls are forwarded immediately.
Incoming calls are forwarded when the handset is busy.
Incoming calls are forwarded if not answered after a period of time.
4. Select from the field.
5. Enter the number you want to forward the incoming calls to in the
6. Press or to select the desired ring time to wait before forwarding (only for No
Answer Forward) in the
7. Press the soft key to accept the change.
For more information, refer to the User guide available online at:
c
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.
.
soft key.
soft key to resume the current call,
.
.
.
->
soft key.
soft key.
field.
field.
.
.
www.yealink.com
Applies to firmware version 10 or later.