Mailbox Setting - Toshiba E-Studio 2500C Manual

5 Registering from TopAccess
[Box Setting] — Click this to specify how the document will be stored in the Box. This
can be set only when creating the Store to e-Filing agent.
P.111 "Box Setting (Mailbox)"
7
After configuring the desired mailbox properties, click [Save].
The mailbox properties are registered.

MailBox Setting

In the MailBox Settings page, specify the general information of the mailbox such as the box
number, password, owner, comment, and notification.
The "Notification" and "Document Print" options are not available when creating the Confi-
dential mailbox or Bulletin Board mailbox.
Mailbox communication is disabled if the settings on this equipment and information regis-
tered for the destination do not match. Check how the box number and the fax number of the
destination are registered on the journal before entering the box number.
1
2
3
4
5
6
1) Box Number
Enter the box number of the mailbox. You can enter up to 20 characters including numbers,
sharp marks (#), and asterisks (*).
You can also specify the sender's fax number to enable the Inbound Fax Routing when reg-
istering a Forward mailbox. If you specify the sender's fax number here, the faxes that are
received from the specified fax number will be routed according to the mailbox settings.
The Inbound Fax Routing is available only for a Forward mailbox. If you select "Confi-
dential" or "Bulletin Board" as an agent, you cannot specify the fax number.
When a fax is sent from the specified fax number with a box number (or sub address),
the Inbound Fax Routing will not apply to the transmission and it is processed according
to the specified box number (or sub address) settings.
108 Managing Mailboxes