Setting Up Fax Settings - Toshiba E-Studio 2500C Manual

8) Magazine Sort
Select the default page arrangement for magazine sort copy.
- Open from left — Select this to set to create a booklet that can be read from a left page.
- Open from right — Select this to set to create a booklet that can be read from a right
page.
9) 2in1/4in1
Select the default page arrangement for 2in1/4in1 copy.
- Write Laterally — Select this to copy each two pages or four pages from right to left or
top to bottom. When the portrait originals are copied using 2in1 or 4in1, this equipment
copies them from right to left. When the landscape originals are copied using 2in1 or
4in1, this equipment copies them from to bottom.
- Write Vertically — Select this to copy each two pages or four pages from left to right or
top to bottom. When the portrait originals are copied using 2in1 or 4in1, this equipment
copies them from left to right. When the landscape originals are copied using 2in1 or
4in1, this equipment copies them from to bottom.
10) Maximum Copies
Select the maximum numbers of pages that users can specify for copying. You can select
either "999", "99", or "9" for the Maximum Copies.
11) Auto 2-sided Mode
Select how the 2-sided mode initially applies to copy settings when originals are set in the
Automatic Document Feeder.
- OFF — Select this to initially apply [1->1 SIMPLEX] when originals are set in the Auto-
matic Document Feeder.
- One-sided/Double-sided — Select this to initially apply [1->2 DUPLEX] when originals
are set in the Automatic Document Feeder.
- Double-sided/Double-sided — Select this to initially apply [2->2 DUPLEX] when origi-
nals are set in the Automatic Document Feeder.
- User Selection — Select this to initially display the screen to select the 2-sided mode
when originals are set in the Automatic Document Feeder.
12) Sorter Mode Priority
Select the default sort mode for copying.

Setting up Fax Settings

In the Fax submenu page in the Setup menu, an administrator can configure the fax device set-
tings and the settings initially apply to fax operations.
Some settings may not apply to the Touch Panel Display as soon as you save the settings.
The settings will be updated by pressing the [FUNCTION CLEAR] button on the Control
Panel or after an Auto Clear time period.
The Fax submenu page in the Setup menu is available only when the optional Fax unit is
installed.
Setting the fax settings
1
Access TopAccess in the administrator mode.
P.122 "Accessing TopAccess Administrator Mode"
Setting up from TopAccess 173