Setting Up Relay Mailbox - Toshiba GD-1221 Operator's Manual

4 SYSTEM FUNCTIONS
If you selected the Confidential Box in Step 5, a password must be used if the docu-
ment is to be retrieved. The remote Fax will require its operator to enter this password
before being able to retrieve the document.
If you selected the Bulletin Board Box in Step 5, assigning a password will require a
password to be entered before any documents can be reserved into the Bulletin
Board Box.
8
Enter the password (up to
20 digits) with the digital
keys and press the
[ENTER] button.
If you make a mistake, press one of the following keys to correct the mistake. For
key locations of [BACKSPACE], [DELETE] and [INSERT], see the following
page.
[CLEAR/STOP] key:
Pressing this key clears all of the values that you entered.
[BACKSPACE] key:
Each press of this key deletes the values that you are entering one by one.
[DELETE] key:
Pressing this key after highlighting the value with the key deletes the value.
[INSERT] key:
Pressing this key permits the insertion of a desired character before (in front of)
an existing character highlighted by the cursor. Press this key again to exit the
Insert mode.
9
Select "1. COMPLETE"
using the
to complete the setting and
press the [ENTER] button.

Setting up relay mailbox

Using relay mailbox, all ITU-T compliant Faxes can be received or transmit documents to and
from this equipment.
Confirm the registered contents on the Mailbox/Relay Box List. (
box list")
114 Mailbox Communication
P.29 "Keyboard"
or button
MAILBOX SETUP(CONFIDENTIAL)
PASSWORD (MAX20):
********
MAILBOX SETUP
1.COMPLETE
2.MAILBOX SETUP
3.MAILBOX DELETE
P.234 "Mailbox/Relay