Toshiba E-Studio 2500C Manual page 280

7 TopAccess Administrator Mode
7
Click [Use NT Domain Server], and Enter the following items. Then
click [Next].
Domain Name — The domain name entered in Step 7 is displayed.
PDC — Enter the server name or IP address of the Primary Domain Controller.
BDC — Enter the server name or IP address of the Backup Domain Controller as you
required.
If the wrong primary or backup domain controller is specified, the [ENTER] button in the
USER AUTHENTICATION screen on the touch panel is highlighted while this equipment
searches for the primary or backup domain controller for 2 to 4 minutes. In that case,
correct the primary or backup domain controller setting after the beep will sound and the
alert message will be displayed on the touch panel.
278 Setting up User Management