Table of Contents
Advertisement
IN/OUT/SET/CH key:
•
Enter manual setting modes: ºC/ºF temperature, 12/24 hour time, manual time and
calendar
•
Toggle between indoor/outdoor temperature and humidity data (Outdoor data can
only be displayed if optional transmitter is purchased)
•
Select outdoor transmitter (if more than 1 transmitter is used; optional)
MIN/MAX/+ key:
•
Toggle between time and calendar display in normal display mode
•
Toggle between MIN/MAX indoor temperature and humidity data
•
Toggle between MIN/MAX outdoor temperature and humidity data (optional).
•
Toggle between MIN/MAX data recorded time and date
•
Change setting in manual setting modes
LCD SCREEN
The Weather Station's LCD is divided into 3 sections, displaying humidity level in a bar
graph format, indoor/outdoor temperature and humidity, time and calendar information.
Humidity level
bar graph
Indoor /outdoor
temperature in
ºC/ºF
DCF Tower
Icon
Time
DCF-77 RADIO CONTROLLED TIME:
The time base for the radio controlled time is a Cesium Atomic Clock operated by the
Physikalisch Technische Bundesanstalt Braunschweig, which has a time deviation of less
than one second in one million years. The time is coded and transmitted from Mainflingen
near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has an approximately 1,500 km
transmitting range. Your radio-controlled Weather Station receives this signal and converts
it to show the precise time in summer or wintertime.
The quality of the reception depends greatly on the geographic location. In normal cases,
there should be no reception problems within a 1500km radius of Frankfurt.
Once the outdoor temperature is displayed on the Weather station, the DCF tower icon in
the clock display will start flashing in theLCD. This indicates that the clock has detected that
Indoor comfort
indicator icon
Indoor/outdoor relative
humidity in %
Outdoor reception
indicator
Advertisement
Table of Contents
