How To Use This Manual; Safety - Kärcher AP 100/50 M Operating Instructions Manual

HOW TO USE THIS MANUAL

This manual contains the following sections:
HOW TO USE THIS MANUAL
-

SAFETY

-
OPERATIONS
-
-
MAINTENANCE
-
PARTS LIST
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from an authorized dealer.
When placing an order for parts, the machine model
and machine serial numberare important. Refer to
the MACHINE DATA box which is filled out during
the installation of your machine. The MACHINE
DATA box is located on the inside of the front cover
of this manual.
MODEL __________________________________
DATE OF PURCHASE _____________________
SERIAL NUMBER ________________________
SALES REPRESENTATIVE # _______________
The model and serial number of your machine is on
the bottom back-end of the machine.
1-1
The SAFETY section contains important information
regarding hazard or unsafe practices of the
machine. Levels of hazards is identified that could
result in product or personal injury, or severe injury
resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its
components in good working condition. They are
listed in this general order:
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
86343680 AP 100/50 M
Vacuum Motor
-
Solution Pump
-
Daily Maintenance
-
- Periodic Maintenance
- Service Schedule
- Machine Troubleshooting
- REF – column refers to the reference
number on the parts illustration.
PART NO. – column lists the part
-
number for the part.
PRV NO. - reference number.
-
- QTY – column lists the quantity of the
part used in that area of the machine.
- DESCRIPTION – column is a brief
description of the part.
SERIAL NO. FROM – If this column has
-
an (*) and a Reference number, see the
SERIAL NUMBERS page in the back of
your manual. If column has two asterisk
(**), call manufacturer for serial number.
The serial number indicates the first
machine the part number is applicable
to. The main illustration shows the most
current design of the machine. When a
boxed illustration is shown, it displays
the older design.
- NOTES – column for information not
noted by the other columns.
NOTE: If a service or option kit is installed
on your machine, be sure to keep the
KIT INSTRUCTIONS which came with
the kit. It contains replacement parts
numbers needed for ordering future
parts.