Front Door Latch Assembly - Subaru 2001 Forester Service Manual

FRONT DOOR LATCH ASSEMBLY

Security and Locks
6. Front Door Latch Assembly
S909334
A: REMOVAL
S909334A18
1) Remove the front door trim. <Ref. to EI-26
REMOVAL, Front Door Trim.>
2) Remove the sealing cover. <Ref. to EB-13
REMOVAL, Front Sealing Cover.>
3) Remove the front inner remote. <Ref. to SL-27
REMOVAL, Front Inner Remote.>
4) Turn rod holder to disconnect joint between key
lock and rod.
5) Turn rod holder to disconnect joint between
outer handle and rod.
6) Turn rod holder to disconnect joint between
crank and rod.
7) Remove the three screws and bolt.
S5M0189A
8) Disconnect the connector. Remove the front
door latch assembly (A).
B: INSTALLATION
S909334A11
Install in the reverse order of removal.
NOTE:
Make sure parts work properly after installation.
C: INSPECTION
S909334A10
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
SL-29