Keyless Transmitter - Subaru 2001 Forester Service Manual

Hide thumbs Also See for 2001 Forester:
Table of Contents

Advertisement

22. Keyless Transmitter

A: REMOVAL
S909325A18
1. TRANSMITTER BATTERY
Remove battery from transmitter.
NOTE:
To prevent static electricity damage to transmitter
printed circuit board, touch steel area of building
with hand to discharge static electricity carried on
body or clothes before disassembling transmitter.
B: INSTALLATION
1. TRANSMITTER BATTERY
Install in the reverse order of removal.
C: INSPECTION
1. TRANSMITTER BATTERY
1) Measure voltage between battery (+) terminal
and (–) terminal.
NOTE:
¼ Battery discharge occurs during measurement.
Complete measurement within 5 seconds.
¼ During battery voltage measurement, voltage
falls more than 1.8 volts in 3 seconds period.
Tester connection
(+)
Battery (+) termi-
Battery (–) termi-
nal
KEYLESS TRANSMITTER
S909325
S909325A1801
B5M1182
S909325A11
S909325A1101
S909325A10
S909325A1001
S6M0291A
Voltage (V)
(–)
More than 2
nal
If NG, replace the battery. (Use CR1620 or equiva-
lent.)
D: REPLACEMENT
1. TRANSMITTER REGISTRATION
NOTE:
A maximum of 3 transmitters can be registered for
each individual vehicle.
1) Remove the side sill cover at the driver's side,
then connect the registration connectors at the
front pillar lower section.
2) Unlock the door lock.
3) Press any button of the transmitter twice to be
registered.
4) The door lock will automatically lock and unlock
in sequence. This indicates the completion of
transmitter registration for the first transmitter.
5) If registration of a second transmitter is now to
be carried out, press any button of that transmitter
twice.
6) The door lock will automatically lock and unlock
in sequence. This indicates the completion of
transmitter registration for the second transmitter.
7) If registration of third transmitter is now to be
carried out, repeat procedure of step 5) and 6).
8) Disconnect the registration connectors after the
completion of all registration operations. After con-
firming the operation of the door lock using the
newly registered transmitter(s), reinstall the side
sill cover at the driver's side.
SL-45
Security and Locks
S909325A20
S909325A2001

Advertisement

Table of Contents
loading

Table of Contents