REAR GATE OUTER HANDLE
Security and Locks
12. Rear Gate Outer Handle
S909626
A: REMOVAL
S909626A18
1) Remove the rear gate lower trim. <Ref. to 42
REMOVAL, Rear Gate Trim.>
2) Disconnect rod (latch to outer handle) from
outer handle (B).
3) Remove the four nuts used to hold outer handle
(B) to the inside of rear gate and detach outer
handle.
S5M0387A
B: INSTALLATION
S909626A11
Install in the reverse order of removal.
NOTE:
Make sure the outer handle works properly after
installation.
C: INSPECTION
S909626A10
1) Inspect the rod for deformation.
2) Make sure the lever and rod move smoothly.
SL-35