Front Door Latch Assembly - Subaru 2003 LEGACY Service Manual

FRONT DOOR LATCH ASSEMBLY

SECURITY AND LOCKS
6. Front Door Latch Assembly
A: REMOVAL
1) Disconnect ground cable from battery.
2) Remove the front door trim. <Ref. to EI-30, RE-
MOVAL, Front Door Trim.>
3) Remove the sealing cover. <Ref. to EB-13, RE-
MOVAL, Front Sealing Cover.>
4) Remove the front inner remote. <Ref. to SL-19,
REMOVAL, Front Inner Remote.>
5) Remove the front door glass. <Ref. to GW-12,
REMOVAL, Front Door Glass.>
6) Remove three nuts, and detach the front door
sash (Rear).
7) Remove the three screws and bolt.
SL-00074
8) Disconnect the connector. Remove the front
door latch assembly.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the lock works properly after installation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
SL-21