Subaru 2001 Forester Service Manual page 21

Security and Locks
B: ELECTRICAL SPECIFICATION
Content
Key warning switch
Registration connector
Door switch
Empty
Power supply
Empty
Door lock switch
Empty
Empty
Empty
Room light/Ignition switch illumina-
tion
Turn signal light (Right)
Turn signal light (Left)
Ground
Power supply (Hazard light)
Power supply
Door and rear gate lock actuator
(Unlock)
Door and rear gate lock actuator
(Lock)
KEYLESS ENTRY SYSTEM
S909345A08
Terminal No.
Battery voltage is present when inserting the key into the ignition
1 (INPUT)
switch.
2 (INPUT) 0 V is present when connecting the registration connector.
3 (INPUT) 0 V is present when any door is open.
4
5 Battery voltage is constantly present.
6
7 (INPUT) 0 V is present when driver's door is unlocked.
8
9
10
¼ 0 V is present when pressing the transmitter OPEN button.
11 (OUTPUT)
¼ 0 V is present when any door is open.
Battery voltage is present when pressing the transmitter OPEN or
12 (OUTPUT)
LOCK button.
Battery voltage is present when pressing the transmitter OPEN or
13 (OUTPUT)
LOCK button.
14 0 V is constantly present.
15 Battery voltage is constantly present.
16 Battery voltage is constantly present.
Battery voltage is present when pressing the transmitter OPEN but-
17 (OUTPUT)
ton.
Battery voltage is present when pressing the transmitter LOCK but-
18 (OUTPUT)
ton.
SL-20
Measuring condition
—
—
—
—
—
B5M1141