Ignition Key Lock - Subaru 2001 Forester Service Manual

Security and Locks

17. Ignition Key Lock

A: REPLACEMENT
1) Remove the battery ground cable.
2) Remove the steering column. <Ref. to DS-30
REMOVAL, Steering Column.>
3) Secure the steering column in a vise. Remove
the bolt with a drill.
4) Remove the ignition key lock.
5) Use a new torn bolt. Tighten the torn bolt to the
end of the thread.
B: INSPECTION
1) Remove the instrument panel lower cover.
2) Remove the lower column cover.
3) Unfasten the holddown clip which secures the
harness and disconnect the connector of the igni-
tion switch from the body harness.
4) Turn the ignition key plate to each position and
check the continuity between the terminals of the
ignition connector.
Switch position Tester connection
LOCK
ACC No. 1 — No. 2
ON No. 1 — No. 2 —
ST No. 1 — No. 3 —
If NG, replace the ignition switch.
IGNITION KEY LOCK
S909318
S909318A20
B5M1061
S6M0162A
S909318A10
Specified condi-
tion
Continuity
Continuity
No. 4
Continuity
No. 4
SL-40