Headset Memory Mode - Polycom SoundPoint IP 560 User Manual

Headset Memory Mode

Select Maximum Intensity.
7.
8. Press the Up or Down soft keys to increase or decrease the backlight
intensity.
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press
display.
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
Press
1.
2. Select Settings > Basic > Preferences > Headset > Headset Memory.
3. Use the or
enable Headset Memory Mode.
Press
4.
display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
Customizing Your SoundPoint IP® 560 Phone
or the Exit soft key repeatedly to return to the idle
.
to select Enabled and press the Select soft key to
or the Exit soft key repeatedly to return to the idle
2 - 5