Users - Panasonic WJ-ND400 Operating Instructions Manual

Users

Use the following procedure to configure information (user name, password, operation level, etc.) about recorder users.
Up to 32 users can be registered.
1
Click the [User mng.] button on the setup menu.
2
On the sub-menu that appears, click [User].
This will display the "User Settings" window.
User setups
Item
User name
Password
Level
Access priority
Default screen
Camera partitioning
♦Initial default
Important:
• You must click press the [Set] button to activate settings on the recorder when registering, editing, or deleting users.
Settings
Name input
(Blank♦)
Enter password
(Blank♦)
LV1♦ / LV2 / LV3 / LV4
1♦ to 16
[Cam.1]♦ to [Cam.64] / [Cam.1-4]
/ [Cam.5-8] / to / [Cam.61-64] /
[Seq]
[View/Operate]♦ / [View] / [--]
3
Configure the settings for each item.
Refer to "User setups" table for details about the settings.
4
Click the [Registration] button.
5
If you want to configure settings for more users, repeat
steps 3 and 4.
6
To complete user registration, click the [Set] button.
Description
Enters the user name.
• Enter between 5 and 14 single-byte alphanumeric
characters.
Enters the password.
• Enter between 5 and 8 single-byte alphanumeric characters.
• Use a password that is not easily guessable by another
person. Also, take care that you do not forget the password.
• To ensure security, change passwords periodically.
Specifies the user level.
• For operations that can be performed at each level, refer to
"User level (page 73)".
Specifies the priority sequence for operations when multiple
users are logged in on the recorder at the same time.
Specifies the live image display immediately after log in.
• Selecting [Cam.1] to [Cam.64] displays the images of the
selected cameras on a 1-image screen.
• Selecting [Cam.1-4] to [Cam.61-64] displays the live images
of the selected cameras on a 4-image screen.
• Selecting [Seq] displays images in a specified sequence.
Specifies the scope of control for each camera channel.
• When [View/Operate] is selected, live/recorded image
display or camera operation can be performed.
• When [View] is selected, live/recorded image display can be
performed, but camera operation cannot.
• When [--] is selected, neither live/recorded image display nor
camera operation can be performed.
User management
69