Panasonic WJ-ND400 Operating Instructions Manual page 30

Live images
Registration of a camera direction on the preset
position.
The current camera direction can be registered on the specified
preset position. Registered preset positions can be used with a
camera supporting the preset position function.
1
Click the [CAM] tab.
2
Perform the camera's pan and tilt operation to move the
camera to the position to be registered.
3
Click the [V] button in the [Preset] box and select the
preset number (1 to 256) you want to register. [Home]
cannot be registered.
4
Click the [Set] button.
The selected preset number is registered.
Move a camera to the preset position.
Move a camera to the preset position registered in advance.
Registering preset positions is required to perform the preset
function.
1
Click the [CAM] tab.
2
Click the [V] button in the [Preset] box and select the
preset number (Home, 1 to 256) to be moved.
3
Click the [Go] button.
The camera moves to the position that was registered as the
preset position for that number.
30
Auto mode function (Auto pan etc.)
Operates the auto functions set for the camera.
1
Click the [CAM] tab.
2
Click the [V] button in the [Auto mode] box and select
the auto mode (auto tracking, auto pan, preset
sequence, sort, patrol) you want to start.
3
Click the [Start] button in the [Auto mode] box to start
the auto mode function.
To turn off the auto mode function, click [Stop].
Note:
• For information about camera's auto mode functions, refer to
the camera's operating instructions.